>
>
>
SZG Double Cone Rotary Vacuum Dryer

COPYRIGHT ©  Shandong Shungeng Drying Equipment Co., Ltd.    鲁ICP备17013141号   Power by:300.cn

PRODUCTS CENTER
Focus on research, design, development and production of drying equipment

SZG Double Cone Rotary Vacuum Dryer

没有此类产品
I want to make an inquiry
Details

Product details

Overview:

SZG double cone rotary vacuum dryer has a biconical tank, which is in vacuum state. The jacket can be guided into steam or hot water so as to heat the inner container, and heat can be transferred to wet material through the inner container to gasify the moisture in wet material. The low-speed machine will drive the tank to rotate, and make material to stir up and down and inside and outside, so as to change the heating surface. Meanwhile, water vapor will be constantly pumped out through the exhaust pipe by vacuum pump, which fastens the drying rate of material. Finally, it reaches the purpose of evenly drying. It meets the “GMP” requirements.

Features:

Since the drying is conducted in vacuum state, it has a higher rate in lower temperatures, twice as much as the rate of common drying equipment. It can save energy and has high efficiency of heat utilization, so it is suitable for the drying of heat sensitive material and readily oxidizable materials, in particular.

The machine has characterized by advanced design, simple internal structure and simple operation. It is easy to clean and materials can be discharged entirely.

Closed drying, no leakage of products and no contamination, it applies to the drying of strong stimulating and toxic materials.

Materials are dried in rotation, and they can be dried to an extent of having a very low water content (≤0.5%), and dried very evenly, so it can meet the requirement of different materials.

The equipment has compact structure, small floor area and easy operation, and it can relieve labor intensity and save labor.

Users can choose stepless speed regulation (1-10 rpm) and step speed regulation (6-10 rpm) for high-speed drying so as to meet different requirements.

Installation Diagram:

Recommended process installation demonstration: solvent recovery process

Dry farming equipment

 

Technical parameters:

 

Model

100

350

500

750

1000

1500

2000

3500

4500

5000

Inside volume of tank(L)

100

350

500

750

1000

1500

2000

3500

4500

5000

Volume of feed(L)

≤50

≤175

≤250

≤375

≤500

≤750

≤1000

≤1750

≤2250

≤2500

Rotation speed(rpm)

3~13

4

Motor power(kw)

0.75

1.1

1.5

2.2

3

4

5.5

7.5

11

15

 

 

 

 

 

 

 

 

Floor area
length×width(mm)

2160×
800

2260×
800

2350×
800

2560×
1000

2860×
1300

3060×
1300

3260×
1400

3760×
1800

3960×
2000

4400x
2500

 

 

 

 

 

 

 

 

Rotation height(h)

1750

2100

2250

2490

2800

2940

2990

3490

4100

4200

 

 

 

 

 

 

 

 

Inside design pressure of tank(MPa)

-0.1~0.15

-0.1~0.15

Design pressure of jacket(MPa)

≤0.3

≤0.3

Operating temperature(℃)

In-tank≤85 Jacket≤140

In-tank≤85 Jacket≤140

When adopting condenser, vacuum pump model, power(kw)

2X-15A
2kw

2X-15A
2kw

2X-30A
3kw

2X-30A
3kw

2X-70A
5.5kw

JZJX300-8
7kw

JZJX300-4
9.5kw

JZJX600-8
11kw

JZJX600-4
20.5kw

JZJX600-4
20.5kw

 

 

 

 

 

 

 

 

When using condenser, vacuum pump model, power(kw)

SK-0.4
1.5kw

SK-0.4
1.5kw

SK-0.8
2.2kw

SK-2.7B
4kw

SK-2.7B
4KW

SK-3
5.5KW

SK-6
11KW

SK-6
11KW

SK-9
15KW

SK-1218.5KW

 

 

 

 

 

 

 

 

Weight(kg)

800

1100

1200

1500

2800

3300

3600

6400

7500

8600

 

 

 

 

 

 

 

 

Note: for dry volume change before and after a lot of material, the charging coefficient can be appropriately increased or reduced.

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article